UPC: 0037332119209
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules. |
| |
|
|
| Manufacturer: |
Tripp Lite |
| Manufacturer Part Number: |
SMART1500RM2U |
| Manufacturer Website Address: |
http://www.tripplite.com |
| Brand Name: |
Tripp Lite |
| Product Line: |
SmartPro |
| Product Name: |
SmartPro 1500RM2U UPS |
| Product Type: |
Line-interactive UPS |
|
|
| Plug/Connector Type: |
NEMA 5-15P |
| Receptacles: |
8 x NEMA 5-15R |
|
|
| Load Capacity: |
1.50 kVA/1.35 kW |
| Input Voltage: |
110 V AC |
| Input Voltage Range: |
120 V AC Single-phase |
| Output Voltage: |
120 V AC Single-phase |
| Frequency: |
60 Hz |
| Waveform Type: |
Sine Wave |
| Filtering: |
EMI / RFI |
|
|
| Network Management: |
SNMP Manageable Optional |
| Overload Protection: |
15A input breaker |
| Alarm: |
On Battery |
| |
Overload |
| |
Low Battery |
| Emergency Power OFF: |
Yes |
|
|
| Status Indicators: |
5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED. |
|
|
| Interfaces/Ports: |
1 x DB-9 |
| |
1 x USB |
| Modular Slots: |
1 x Communications Slot |
|
|
| Batteries: |
Sealed Lead Acid User Replaceable Hot-swappable |
| Backup/Run Time: |
0.22 Hour 750 VA/675 W Half Load |
| |
0.08 Hour 1.50 kVA/1.35 kW Full Load |
| Battery Life: |
3 Year to 6 Year |
| Battery Recharge Time: |
4 Hour |
|
|
| Temperature: |
32°F (0°C) to 104°F (40°C) Operating |
| Humidity: |
0 to 95% Non-condensing Relative Humidity |
|
|
| Height: |
3.5" |
| Width: |
17.5" |
| Depth: |
13.5" |
| Power Cord/Cable: |
10 ft |
| Form Factor: |
2U Rack-mountable |
| Weight (Approximate): |
46.00 lb |
|
|
| Package Contents: |
- SmartPro 1500RM2U UPS
- SMART 1500RM2U UPS System
- Mounting hardware for 4 post rackmount installation
- Cabling for USB & DB9 monitoring and EPO switching
- PowerAlert unattended shutdown and UPS/Power monitoring software
- Warranty information
|
| Additional Information: |
- SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
- 1500VA / 1000 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
- Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional 2-9USTAND accessory
- Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1000 watts)
- Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
- Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
- PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
- Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
- Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
- Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
- Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
- Emergency Power Off (EPO) interface with cable
- Multi-function audible alarms and set of 5 front panel LEDs
- Network-grade AC surge suppression
- Attractive all-black color scheme
- UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
- Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
|
| System Requirements: |
TYPICAL APPLICATIONS: Ideal for rackmount or upright tower protection of fileservers, network accessories and telecommunications equipment in server rooms, internetworking closets, co-location racks, kiosks and a variety of other locations. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. |
| Certifications & Standards: |
UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
|
|
| Limited Warranty: |
2 Year |
|
|
|
