Tripp Lite UPS SmartPro 230V 1.5kVA 940W Line-Interactive UPS Tower DB9 6 Outlets Battery Backup

The SMARTINT1500 SmartPro 230V 1.5kVA 940W Line-Interactive UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. Ideal for backing up VoIP systems, point-of-sale applications and network closets, the SMARTINT1500 switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.

Featuring six IEC-320-C13 outlets and two C13-to-C14 power cords, the SMARTINT1500 has an internal battery that provides 20 minutes of support at half load and seven minutes at full load. Front-panel LEDs indicate line power, battery power, load level, voltage regulation and battery status. An alarm sounds to indicate power failure or a low battery.

Automatic voltage regulation (AVR) maintains 230V nominal output over an input range of 165V to 277V without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 480-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's PowerAlert software (available via free download), SMARTINT1500 enables safe unattended system shutdown and file saves in case of a prolonged power failure.

Protects Mission-Critical Equipment

• Provides fully regulated AC output for VoIP systems, point-of-sale applications and network closets
• Audible alarm signals loss of utility power or low battery
• 6 IEC-320-C13 outlets
• C14 inlet
• 480-joule surge suppression rating

Reliable Battery Backup

• Supports half load up to 20 min. and full load up to 7 min.
• Internal batteries designed for hot-swap field replacement
• 94% line-power efficiency rating saves money in energy costs
• Cold-start capability enables turn-on in battery mode during blackouts

Automatic Voltage Regulation (AVR)

• Maintains 230V nominal output over input range of 165V-277V without using battery power

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

• Front-panel LEDs signal indicate line power, battery power, load level, voltage regulation and battery status

Communications Port

• DB9 port enables data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert

Small-Footprint Tower Housing

• Mounts on wall with optional UPSWM accessory

• SmartPro 1500VA Tower UPS
• SMARTINT1500 UPS System
• 2 IEC-320 C13 to C14 power cables
• 2 DB9 monitoring cables
• PowerAlert unattended shutdown and UPS/Power monitoring software
• Instruction manual with warranty information

• Ideal for the protection of fileservers, network accessories and telecommunications equipment. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. Ideal for sensitive electronic applications in areas where brownouts and overvoltages are common
• Switches: Yes, includes 2 front panel mounted push-button switches for system enable, self-test and alarm cancel functions
• Form factors supported: Tower, wall mountable with optional UPSWM accessory
• Low voltage transfer to battery power: 165V (resets to line power as line voltage increases to 168V or higher)
• High voltage transfer to battery power: 277V (resets to line power as line voltage decreases to 271 or lower)