Cisco Aironet PoE Injector

by
CISCO
PCN#
6F5730
MFG#
AIR-PWRINJ-60RGD1=
$662.76
cps

Extended & Accidental Damage Protection Plans Available Details

  Free Shipping
Estimated Shipment:

Calculating Shipping

Product Highlights:
  • 120 V AC, 230 V AC Input
  • 55 V DC, 2 A Output
  • 1 x Ethernet Input Port(s)
  • Show more

Product Condition: New and Factory Fresh
Shipping Weight: 3 lbs.
Cisco Aironet PoE Injector
Tech Specs
Specifications

Manufacturer

Cisco Systems, Inc

Manufacturer Part Number

AIR-PWRINJ-60RGD1=

Manufacturer Website Address

http://www.cisco.com

Brand Name

Cisco

Product Line

Aironet

Product Name

Aironet PoE Injector

Marketing Information

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.

Product Type

PoE Injector
Technical Information

Protection Type

Surge Protection
Power Description

Input Voltage

  • 120 V AC
  • 230 V AC

Maximum Output Voltage

55 V DC

Maximum Output Current

2 A

Maximum Output Power

60 W
Interfaces/Ports

Input Ports

1 x Ethernet

Output Ports

1 x Ethernet
Physical Characteristics

Mount Type

Pole/Wall-mountable

Height

2.8"

Width

5.9"

Length

8.4"

Weight (Approximate)

2.98 lb
Miscellaneous

Compatibility

Cisco Aironet 1560 Series Outdoor Access Points

Certifications & Standards

  • CE
  • IEEE 802.3af
  • IEEE 802.3at
  • FCC Part 15, Class B
  • CE, EN50522 Class B
  • EN55024
  • VCCI
  • EN61000-4-5 Class 5 (6kV CM)
  • UL60950-1
  • UL60950-22
  • GS
  • Environmentally Friendly

    Yes

    Environmental Certification

    • RoHS
    • WEEE

    Country of Origin

    Philippines