ComNet CNGE28FX4TX24MS2 Ethernet Switch

The ComNet CNGE28FX4TX24MS2 Layer 2 Managed 28 Port Ethernet Switch supports twenty-four 10/100/1000 BASE-TX ports and four 10/100/1000 BASE-TX or 100/1000 BASE-FX SFP Combo ports of Ethernet data. The four combination ports are 10/100/1000TX or 100/1000FX SFP* configurable for fiber type (multimode or single-mode), connector type and distance. Dual 48 VDC input power design ensures vital network capabilities with minimum downtime. Utilizing RSTP/STP (802.1w/1D) MSTP, and X-Ring redundant ring topologies, a network recovery time of <20 ms is provided for protection from network faults or temporary interruptions. The CNGE28FX4TX24MS2 is optically (100/1000BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet device and are hardened for use in harsh operating environments.

Features

• STP/RSTP/MSTP supported
• Port lock to prevent access from unauthorized MAC address
• SNMP V1/V2c/V3 for secure network management
• Legacy ring allows the switch to be used in an existing ring of ComNet X-Ring enabled switches
• Low-profile 1-RU (1.75-inch) high rack-mountable chassis mounts within any standard 19-inch equipment rack
• Event notification through Syslog, E-mail, SNMP trap
• 56 Gbps Backplane for layer 2 traffic forwarding
• IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic & Port Trunking for ease of bandwidth management
• RMON for traffic monitoring
• No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements.
• Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately).
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
• Web-based, Telnet, Console (CLI), and Windows-based utility (eConsole) configuration

Applications

• ITS Traffic Signalization & Surveillance/ Incident Detection Networks
• Industrial and Factory Automation
• Integrated IP-Video and Data Transmission Networks
• Industrial Security Access Control Systems

• 24 x Gigabit Ethernet Network
• 4 x Gigabit Ethernet TP/SFP Combo

• Twisted Pair
• Optical Fiber

• 10/100/1000Base-TX
• 100/1000Base-FX