Tripp Lite by Eaton UPS SmartPro 120V 1kVA 750W Medical-Grade Line-Interactive Tower UPS 4 Outlets Full Isolation Expandable Runtime

Ideal UPS Backup in Healthcare Facilities

• Complies with UL 60601-1 standards for use in patient-care facilities
• Isolation transformer with Faraday shield offers full isolation and removes common mode noise
• 6 ft. power cord with 120V NEMA 5-15P-HG plug
• Floating AC output prevents noise coupling and meets agency requirements for isolation

Reliable Battery Backup and Surge Protection

• Supports half load up to 28 min. and full load up to 10 min.
• 4 NEMA 5-15R-HG outlets with 940-joule surge protection
• Filters out disruptive EMI/RFI line noise that can cause equipment damage or data loss
• Resists electrostatic discharge

LEDs and Audible Alarms

• Front LEDs indicate power, mode, load and battery status
• Alarms alert you to power failure, overload and low battery
• Mute/quiet mode ideal for use in quiet patient-care vicinities

Saves Files When You're Away

• Included PowerAlert® software enables safe, unattended system shutdown and file saving during power failures
• Connects to computer via DB9 or USB port with included cables

• 115 V AC
• 120 V AC

• On Battery
• Overload
• Low Battery

• SmartPro 1200XLHG UPS
• SMART 1200XLHG Medical Grade Tower UPS System
• PowerAlert Software and cabling
• Warranty information
• Instruction manual

• Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required
• Maintains less than 300 microamps leakage current for UPS and all connected equipment
• Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
• Provides connected equipment with continuous power during short and long duration loss of commercial power
• Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27)
• Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power
• Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections
• Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
• Resistant to electrostatic discharge
• Supports loads up to 1000VA / 750 watts
• 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts)
• 4 protected hospital-grade outlets; 6-ft. cord
• 1-RS-232 and 1-USB serial port for network interface; SNMP compatible
• SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory
• Complete surge protection, line isolation and EMI/RFI noise filtering
• 2 year product warranty
• PowerAlert unattended shutdown software and complete cabling included
• 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace
• Battery replacement door
• Back panel grounding lug