Tripp Lite DisplayPort Over IP Receiver Extender Cat5/6 w/ RS-232, IR Control

by
TRIPP LITE
PCN#
8E1136
MFG#
B160-100-DPSI
$136.88
cps

Extended & Accidental Damage Product Replacement Plan Available Details

  Free Shipping
Estimated Shipment:

Calculating Shipping

Product Highlights:
  • 1 Output Device
  • 656.17 ft Range
  • 1 x Network (RJ
  • Show more

Product Condition: New and Factory Fresh
Limited Warranty1 Year
Shipping Weight: 2 lbs.
Tripp Lite DisplayPort over IP Extender Receiver over Cat5/Cat6 RS-232 Serial and IR Control 1080p 60 Hz 328 ft. (100 m) TAA
Tech Specs
Specifications

Manufacturer

Tripp Lite by Eaton

Manufacturer Part Number

B160-100-DPSI

Manufacturer Website Address

https://tripplite.eaton.com/

Brand Name

Tripp Lite by Eaton

Product Model

B160-100-DPSI

Product Name

Receiver Unit

Marketing Information

The B160-100-DPSI DisplayPort Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet (100 m) away. With an additional 328 feet between the switch and the transmitter (sold separately), the total maximum distance from source to display is 656 feet (200 m).

The B160-100-DPSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

The B160-100-DPSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz. It works with any analog or digital source, including HDMI and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.


*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

Features

Extends and Distributes DisplayPort A/V, Serial and IR Control Signals over Cat5/6 Cabling

  • Converts source video to IP-based signal transmitted to and distributed through network switch
  • Extends signal up to 328 ft. (100 m) from switch
  • Can also connect directly to transmitter up to 328 ft. away


Designed for Managed Network Switches with IGMP

  • Allows login and remote management via switch interface
  • Works with any analog or digital source, including HDMI and VGA
  • Connect up to 64 transmitters and 255 receivers in single managed switch installation


Enhanced Technical Features

  • Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps
  • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)


Plug and Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Product Type

Video Extender Receiver
Technical Information

Connectivity Technology

Wired

Number of Output Devices Supported

1

Maximum Operating Distance

656.17 ft
Video

Graphics Modes

Full HD

Maximum Video Resolution

1920 x 1080
Interfaces/Ports

Network (RJ-45)

Yes

DisplayPort

Yes

Serial Port

Yes

Number of Network (RJ-45) Ports

1
Media & Performance

Media Type Supported

Twisted Pair

Twisted Pair Cable Standard

Category 6
Physical Characteristics

Form Factor

  • Wall Mountable
  • Rack-mountable
  • Pole-mountable
Miscellaneous

Package Contents

  • Receiver Unit
  • External Power Supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-In Cable
  • 3.5 mm to DB9 Adapter Cable (M/M)
  • Mounting Hardware
  • Owner's Manual

Environmentally Friendly

Yes

Country of Origin

Taiwan

TAA Compliant

Yes
Warranty

Limited Warranty

1 Year