Tripp Lite by Eaton UPS SmartPro 230V 1.5kVA 900W Line-Interactive Sine Wave UPS Tower Network Card Options USB DB9 8 Outlets

Featuring eight C13 outlets and a C14 inlet that accepts a user-supplied AC power cord, the SMX1500SLT has an internal battery that provides 20 minutes of support at half load and eight minutes at full load. Front-panel LEDs indicate line power, voltage regulation, load level and battery status. An alarm sounds to indicate power failure or overload.

Automatic voltage regulation (AVR) maintains selectable 220V, 230V or 240V nominal output over an input range of 174V-266V (220V), 182V-278V (230V) or 190V-290V (240V) without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 350-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's downloadable PowerAlert® software, the SMX1500SLT enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional Network Managment Card permits remote management of the UPS

Protects Mission-Critical Equipment

• Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
• Audible alarm signals loss of utility power or overload
• 8 C13 outlets
• C14 inlet accepts user-supplied AC power cord with country-specific plug
• 350-joule surge suppression rating

Reliable Battery Backup

• Supports half load up to 20 min. and full load up to 8 min.
• Internal batteries designed for hot-swap field replacement
• Cold-start capability enables turn-on in battery mode during blackouts

Automatic Voltage Regulation (AVR)

• Maintains selectable nominal output without using battery power
• Corrects brownouts and overvoltages from 174V-266V (220V), 182V-278V (230V) or 190V-290V (240V)

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

• Front-panel LEDs indicate line power, voltage regulation, load level and battery status

Network Management Cards

• Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
• Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
• PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations

Communication Ports

• USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from

Telephone/Network

• Protect against power surges over telephone/DSL or network Ethernet lines

• RJ-45
• RJ-11

• SmartPro SMX1500SLT 1500VA Tower UPS
• SMX1500SLT UPS System
• PowerAlert Software CD-ROM
• USB and serial cabling
• 2 IEC C13-to-C14 jumper cables
• Owner's manual with warranty information

Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 174V (220V), 182V (230V) or 190V (240V) or less. Resets back to line power mode as line voltage increases to 184V (220V), 192V (230V) or 200V (240V) volts

• High voltage transfer to battery power: Switches to battery power as line voltage increases to 266V (220V), 278V (230V) or 290V (240V) or higher. Resets back to line power mode as line voltage decreases to 258V (220V), 270V (230V) or 282V (240V)
• Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VoIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously-regulated output power