CyberData Singlewire Paging Adapter

The Singlewire Paging Adapter provides a direct connection to legacy analog paging systems enabling InformaCast paging events to be broadcast. The on-board relay can be controlled using InformaCast GPI/O commands or can be set to activate when a page has begun.

The SPA supports a Line-In input for playing MOH from a remote source.

• Protocol : InformaCast V4.0 and later
• Ethernet I/F : 10/100 Mbps
• Power Input : PoE 802.3af or 48VDC
• Operating Temperature : -10 degrees C to 50 degrees C (14 degrees F to 122 degrees F)
• Payload Types : G711
• Page Port Output : Balanced 600 Ohm 5VPP
• Input Signal Amplitudes : 2.0 VPP maximum
• Input Impedance: 10k Ohm
• Output Signal Amplitudes : 2.0 VPP maximum
• Output Level : +2dBm nominal
• Total Harmonic Distortion : 0.5% maximum
• Output Impedance : 10k Ohm
• Web-based configuration and firmware upload
• PoE 802.3af enabled (Power-over-Ethernet)

• UL 60950
• FCC Class A