Lexmark MS911, MX91x Staple Punch Finisher (3-Hole)

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

• Plain Paper
• Recycled Paper
• Bond Paper
• Glossy Paper

• A3
• A4
• Executive
• B4 (JIS)
• B5 (JIS)
• Ledger
• Letter
• Legal
• SRA3

• Lexmark MX910de
• Lexmark MX912dxe
• Lexmark MX911dte
• Lexmark MS911de