SMART 2200 NET 2236332LINE-INTER W/ POWERALERT SW

by
EATON
PCN#
SQ2769
MFG#
SMART2200NET
$1,189.60
cps

Extended & Accidental Damage Protection Plans Available Details

Estimated Shipment:

Calculating Shipping

Product Highlights:
  • Tower
  • 4 Hour Recharge
  • 11 Minute Stand

Show more

Product Condition: New and Factory Fresh
Limited Warranty3 Year
Shipping Weight: 83 lbs.
Tripp Lite by Eaton UPS SmartPro 120V 2.2kVA 1.7kW Line-Interactive UPS Tower Extended run 3 DB9 ports Battery Backup
Tech Specs
Specifications

Manufacturer

Eaton Corporation

Manufacturer Part Number

SMART2200NET

Manufacturer Website Address

http://www.eaton.com

Brand Name

Tripp Lite series

Product Line

SmartPro

Product Name

SmartPro 2200VA UPS

Marketing Information

Tripp Lite's SMART 2200NET intelligent, line interactive large tower UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 27 minutes half load runtime and 11 minutes fully loaded. Runtime is expandable with optional BP24V28-2U (limit 1) and BP24V70-3U external battery packs. 2200VA/1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic applications. Includes 6 protected outlets. Supports remote monitoring of UPS and site power conditions via built-in RS-232 enabled monitoring port, plus standard UPS monitoring via 2 built in contact closure ports. PowerAlert UPS monitoring and unattended shutdown software is available via free download. Built-in audible alarm and front panel LEDs indicate line power, battery power, battery charge level, load level, plus voltage regulation status. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.

Product Type

Line-interactive UPS
Technical Information

Plug/Connector Type

NEMA 5-15P

Receptacle Type

NEMA 5-15R

Receptacle Detail

6 x NEMA 5-15R

Cord Length

8 ft

Transfer Time

4 ms
Power Description

Load Capacity (VA)

2200 VA

Load Capacity (Watt)

1700 W

Input Voltage

120 V AC

Output Voltage

120 V AC

Waveform Type

Pulse-width Modulated Sine Wave

Surge Energy Rating

720 J
Management

Network Management

SNMP Manageable

Alarm

On Battery
Controls/Indicators

Status Indicators

Includes 5 front panel LEDs to indicate BATTERY CHARGE LEVEL, AC LINE POWER STATUS, VOLTAGE REGULATION STATUS, UPS LOAD LEVEL and BATTERY LOW / REPLACE information
Interfaces/Ports

Total Number of Expansion Slots

3
Battery Information

Battery Chemistry

Lead Acid

Backup/Run Time (Full Load)

11 Minute

Backup/Run Time (Half Load)

27 Minute

Battery Life

6 Year

Typical Battery Recharge Time

4 Hour
Environmental Conditions

Maximum Operating Temperature

122°F (50°C)
Physical Characteristics

Color Family

Gray

Product Color

Gray

Height

17"

Width

9"

Depth

12.50"

Form Factor

Tower

Weight (Approximate)

80 lb
Miscellaneous

Package Contents

  • SMART2200NET UPS System
  • PowerAlert Software CD
  • 3 x 6-ft. network cables
  • Warranty information
  • Instruction manual

Additional Information

    • SMART2200NET line interactive UPS offers battery derived AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
    • 2200VA / 1700 watt power handling capability supports a variety of networking, telecom and other sensitive electronic devices
    • Large internal batteries offer runtimes of 27 minutes at half load (1100VA / 850 watts) and 11 minutes at full load (2200VA / 1700 watts)
    • Runtime is further expandable with optional external BP24V33 battery packs (output VA is de-rated as external battery packs are added, see specifications)
    • Automatic Voltage Regulation (AVR) circuits maintain 120V nominal output over an input voltage range of 87-140V
    • Includes 6 fully protected NEMA 5-15R outlets with 2 single outlet load banks that can be individually powered off and back on again via software interface
    • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user defined script commands
    • Offers simultaneous monitoring of up to 3 directly connected devices through included DB9 contact closure and RS-232 enabled interfaces, or the monitoring of any number of additional servers over IP with included PowerAlert monitoring software
    • In addition to the contact closure monitoring of on battery, low battery and power restored messaging, built-in RS-232 interface supports messaging of UPS and line power status, including AC line voltage, DC battery voltage and remaining battery capacity
    • Supports activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
    • Diagnostic LEDs (indicate 17 performance conditions)
    • UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Business) Listed
    • 250,000 Ultimate Lifetime Insurance (USA & Canada Only)

Certifications & Standards

UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications

Software Included

PowerAlert Software

Recycled

No

Assembly Required

No

Country of Origin

China
Warranty

Limited Warranty

3 Year