
PRODUCT HIGHLIGHTS
- Limited Warranty5 Year
- Shipping Weight6.40 lbs.
- Black
- Internal
- 120 V AC, 230 V AC Input
- 3.3 V DC, 5 V DC, 12 V DC, -12 V DC, 5 V SB Output
- 1200 W
- Active PFC
- 1 +12V Rails
- PCI Express Connector 5.1
- 1 Fan(s)
- 90% Efficiency
- On/Off Switch, Low Noise
Thermaltake TOUGHPOWER GT 1200W
PRODUCT HIGHLIGHTS
- Limited Warranty5 Year
- Shipping Weight6.40 lbs.
- Black
- Internal
- 120 V AC, 230 V AC Input
- 3.3 V DC, 5 V DC, 12 V DC, -12 V DC, 5 V SB Output
- 1200 W
- Active PFC
- 1 +12V Rails
- PCI Express Connector 5.1
- 1 Fan(s)
- 90% Efficiency
- On/Off Switch, Low Noise
Thermaltake TOUGHPOWER GT 1200W
Overview
Toughpower GT SeriesThe fully modular Toughpower GT series is designed to deliver 80 PLUS Gold efficiency and is compatible with ATX 3.1 standards. Its native PCIe 12V-2x6 (12+4 pin) modular interface efficiently powers PCIe 12+4 pin graphics cards. Backed by an extensive 5-year warranty, the Toughpower GT series meets the needs of value-oriented users seeking a new power supply with reliable performance.ATX 3.1 ReadyToughpower GT series is fully compatible with ATX 3.1 specifications which supports up to 200% power excursion, reaches 60% efficiency at low load and complies with required power supply timing standards.PCIe Gen 5.1 ReadyToughpower GT series comes with a PCIe 12V-2x6 connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs.The wattage marked on the PCIe 12+4-pin cable connector represents the recommended wattage (Ref. Intel design guideline). The bundled PCIe Gen 5.1 (12+4pin) cable connector of the Toughpower GT 1200W can deliver up to 600W for PCIe 12+4pin graphics cards.Ultra Quiet 120mm Hydraulic Bearing Fan with Smart Zero FanFeaturing an 120mm Hydraulic Bearing Fan to keep friction at really low level. Designed with our Smart Zero Fan to adjust the fan speed and minimizes undesired noise.High Amperage Single +12V Rail & High-Class TechnologiesPowerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation.Fully Modular Low-Profile CablesOffers cable selection for users while powering the system at an advantageous voltage. Low-profile flat white cables make cable management easier, reduces clutter and increases airflow inside the chassis.Built-in Industrial Grade ProtectionTo protect the hardware, Toughpower GT series is built with industrial grade protections: OCP(Over Current Protection), OVP (Over Voltage Protection), UVP(Under Voltage Protection), OPP(Over Power Protection), SCP(Short Circuit Protection), OTP(Over Temperature Protection).80 PLUS Gold CertifiedToughpower GT series saves energy through its high energy efficiency up to 90% and is certified to 80 PLUS® Gold. More from the Manufacturer
OVERVIEW
Thermaltake TOUGHPOWER GT 1200W

Toughpower GT SeriesThe fully modular Toughpower GT series is designed to deliver 80 PLUS Gold efficiency and is compatible with ATX 3.1 standards. Its native PCIe 12V-2x6 (12+4 pin) modular interface efficiently powers PCIe 12+4 pin graphics cards. Backed by an extensive 5-year warranty, the Toughpower GT series meets the needs of value-oriented users seeking a new power supply with reliable performance.ATX 3.1 ReadyToughpower GT series is fully compatible with ATX 3.1 specifications which supports up to 200% power excursion, reaches 60% efficiency at low load and complies with required power supply timing standards.PCIe Gen 5.1 ReadyToughpower GT series comes ...
PACKAGE CONTENTS
No package contents information available.
Key Features
- Converts Current To The Desired Voltage And Frequency To Manage Your Power Requirements
- The Compatible Output Voltage Of 3.3 V DC Ensures That The Device Is Ready To Use When Needed
- The Maximum Output Power Of 1200 W Boosts Up The Performance
FEATURES & DESIGN
Key Specifications
| Specification Compliance | ATX 3.1 |
|---|---|
| Efficiency | 90% |
| Power Factor Correction (PFC) | Active |
| Number of Fans | 1 |
| Fan Bearing Type | Hydraulic Bearing |
| Fan Diameter | 120 mm |