FLAT PANEL DUAL SWING ARM WALL MOUNT - STEEL

Centris Technology tilt mechanism adjusts to provide fingertip tilt with most flat panels. Post-installation height adjustment up to 1" for ultimate installation flexibility. Q-Latch Mounting System secures flat panel to mount with a latching flag. Extends 37" for viewing from any angle, and remains low-profile in home position. CableTrac System provides built-in cable management channels inside the arms for a clean installation.

• 2 x Plasma Side Bracket
• 2 x Plasma Top/Bottom Cross Bracket
• 4 x Mounting Button - Tapped
• 4 x (10-24 x .500) Button Head Cap Screw
• 4 x (M8 x 35mm) Phillips Pan Head Machine Screw
• 4 x (M8 x 30mm) Phillips Pan Head Machine Screw
• 1 x 5/32 Allen Key
• 4 x (.680 x .390 x .625) Nylon Spacer
• 4 x (¼-20 x .500") Button Head Cap Screw
• 1 x 1/8 Allen Key
• 1 x Wall Mount
• 2 x Cover Plates
• 4 x End Caps
• 12 x Tiewraps
• 4 x (5/16" x 2-1/2")
• 4 x 5/16" Flat Washers
• 1 x Adjustment Wrench
• 1 x Adjustment Bar

• Depth From Wall: 3.4"
• Extension: 37"
• Tilt/Roll: +5º, -17º / ±2.5º
• Swivel: up to 90° left/right
• Height Adjustment: 1"
• Lateral Shift: up to 9"
• Mounts on Studs: 16"

42" - 71" LCD/Plasma TV