Cisco Multiband Wall-Mount Antenna

The AIR-ANTM5560P-R Indoor Multi-band Wall-Mount Antenna operates in the 2.4 GHz and 5 GHz bands, and is designed for use with spatial-diversity access point (AP) systems. It is compatible with Cisco IEEE 802.11a/b/g radio products using a reverse-polarity threaded Neill-Concelman (RP-TNC) connector.

• UHF
• SHF

• 2.4 GHz to 2.4 GHz
• 5.9 GHz to 4.9 GHz

• AIR-ANTM5560P-R Indoor Multi-band Wall-Mount Antenna
• Articulating arm
• Molded wall mount
• Two 1/4-20 hex nuts
• Molded antenna mount
• Two 1/4-in. flat washers
• Four 8-32 nylon lock nuts
• Two 1/4-in. lock washers
• Two 1/4-20 x 1-1/4-in. machine screws
• For mounting on a pole:

• Two worm tie clamps

• For mounting on a wall:

• Four wall anchors
• Four 8-18 x 3/4-in. self-tapping Phillips screws

• The AIR-ANTM5560P-R antenna requires a Cisco 802.11a/b/g radio product that uses a RP-TNC connector
• Environment: Indoor only

Peak gain:

• 2.4-GHz: 5.5 dBi
• 5-GHz: 6 dBi

Elevation plane 3 dB beamwidth (H-plane):

• 2.4-GHz: 68 degrees
• 5-GHz: 52 degrees

Elevation plane 3 dB beamwidth (E-plane):

• 2.4-GHz: 66 degrees
• 5-GHz: 60 degrees