4U 18.5 D VALUE LINE EXPANSION ENCLOSUR

This 10 slot rackmount expansion platform provides GPU expansion at a value price.

The 4UV supports 2 PCIe 3.0 x16 host connections to 10 PCIe 3.0 x16 slots with two 1m cables to the host server. The system supports 8 double width GPUs or 10 single slot GPUs or add-in boards. Two fan choices allow for high-power GPU cooling up to 300W per GPU or a set-and-forget manual speed control using PWM fans when lower power GPUs or add-in cards are used. Two 2000W power supplies provide up to 4000W of usable power to the GPU accelerator system.

Features:

• 4U rackmount design
• 10 PCIe 3.0 x16 expansion slots
• Two PCIe 3.0 x16 host connections
• Two PCIe 1m cables
• Tach and PWM fan options
• Two 2000W load-sharing power supplies
• Eight EPS12V PCIe power connectors

• 4U Value GPU Accelerator System
• Tool Less Rack Slides

PCIe Backplanes

• Two OSS-PCIe-BP-457 PCIe3 5-slot expansion backplanes.

The 10-slot integrated system includes:

• Two HIB38-x16 PCIe cable target interfaces (one per backplane)
• Six PCIe3 x16 double-width slots
• Four PCIe3 x16 single-width slots

Host/Target Interface

• The system includes two PCIe 3.0 x16 host/target interfaces for connecting the accelerator to just about any server.

HIB38-x16 Host/Target Interfaces:

• Half-height, half length, single slot x16 PCIe add-in card form factor
• PCIe3 x16 physical card edge connector (128 Gbps)

• Accepts iPass copper cables up to 2m

• Fast-cut through, 150ns latency
• Non-blocking switch fabric
• Maximum server compatibility design
• SSC isolation
• Integrated 4-channel DMA engine
• 6.4W typical

Cables

• Each host/target interface comes with a Passive x16 1m cable

Cooling
Three 120mm x 38mm fans mounted to the front bezel of the chassis

• 250CFM fixed-speed fans
• Tachometer monitoring via front panel LED
• Perfect for GPU or FPGA accelerator applications up to 3000W

Power
Dual load-sharing power supplies pluggable from the rear of the chassis:

• Two 2000W 80Plus Titanium efficiency power supplies
• Two integrated 220-240V, 10A AC inputs (one in each supply)
• Power supplies can provide up to 4000W non-redundant total power to the system
• Supplies are redundant hot-swap when system power requirements are under 2000W total

Aux Power

• Up to 8 EPS12V 8-pin 12V PCIe aux power cables available

• RoHS 2
• RoHS