SIGNALTEK QT PRO QUALIFIER SIGNALTEK QT PRO QUALIFIER

The new SignalTEK QT Series is the ultimate 10G qualification tester for copper, fibre, and Wi-Fi diagnostics. Powered by TREND AnyWARE Cloud, enabling remote reporting and test result analysis.

As networks evolve to support higher bandwidth, lower latency, and increased device density, 10 Gigabit Ethernet is rapidly becoming the standard for future-proof LAN infrastructures. The transition to fibre optic backbones and the growing demand on Wi-Fi networks require precise, reliable and scalable testing solutions, which is exactly what the SignalTEK QT delivers. The SignalTEK QT Series was designed for today's Copper, Fibre and Wi-Fi networks.

Copper Qualification

Ensure the desired network speed is supported by performing an RF test of the cable to test NEXT, Return Loss and Insertion Loss. SignalTEK QT will display the available performance versus the desired speed with an easy-to-read display. Up to 12 remotes are available for rapid testing. SignalTEK QT allows selection of speeds from 10Mb/s to 10Gb/s including the new 2.5 & 5Gb/s multigig speeds.

Fibre Qualification

SignalTEK QT Pro qualifies fibre links in accordance with the IEEE 802.3 standard up to 100Gb/s by measuring insertion loss and length of fibre cabling using a convenient loopback test. TREND's high performance SFP modules offer high accuracy insertion loss measurements and the SignalTEK QT Pro detects the installed SFP module to automatically set Pass/Fail limits.

Wi-Fi Testing

Analyse Wi-Fi channel strength and identify access points that are on overlapping channels to maximise network performance. Channel utilisation graphs help determine which access points (APs) are overloaded with users. Connect to a network and perform diagnostics with ping, traceroute and device scan tests.

Copper Cable Qualification

Qualify performance from 10Mb/s to 10Gb/s including Multi-Gig speeds with Live wiremap and TDR fault location.

Fibre Cable Qualification

Qualify performance from 10Mb/s to 100Gb/s by measuring dB loss and length to IEEE standards.

Wi-Fi Channel Scan and Utilisation

Select a channel to view the name, IP address, MAC address and signal strength of APs on each channel to help balance utilisation.

PoE Load Test

Ensure installed cables provide enough power for PoE devices by performing a load test with up to 90 watts including Pass/Fail results.

Device Scan

Connect to active copper/fibre/Wi-Fi networks and collect a list of connected devices including the vendor ID, IP address and MAC address with automatic checking for IP address conflicts.

Access Point Location

Use the internal or external antennas to locate hidden access points with the responsive signal strength indicator

• Cable Testing
• Fiber Optic Cable Testing

• Twisted Pair
• Optical Fiber

• SignalTEK QT Pro 10 Gigabit Copper & Fibre Qualification Tester
• Soft carry case
• 1 x Plug (male) Copper Remote - ID #1
• 1 x Socket (female) Copper Remote - ID #1
• 1m Cat 6A Shielded Patch Cord
• 1 x 850nm MM High Stability SFP Module
• 1 x LC-LC OM3 MM Duplex Patch Cord
• 1 x LC-SC OM3 MM Duplex Patch Cord
• 1 x LC Multimode Fibre Loopback Remote
• 1 x SC Multimode Fibre Loopback Remote
• 2.5 & 1.25mm Fibre Cleaning Pen
• USB-C Charger with Changeable Plugs

• Network
• Optical Fiber