Tripp Lite UPS Smart 1050VA 650W International Tower AVR 220V-240V Pure sine Wave RJ45 C13

Featuring eight C13 outlets and a C14 inlet that accepts a user-supplied AC power cord, the SMX1050SLT has an internal battery that provides 20 minutes of support at half load and seven minutes at full load. Front-panel LEDs indicate line power, voltage regulation, load level and battery status. An alarm sounds to indicate power failure or overload

Automatic voltage regulation (AVR) maintains selectable 220V, 230V or 240V nominal output over an input range of 174V-266V (220V), 182V-278V (230V) or 190V-290V (240V) without using battery power. EMI/RFI noise filtering improves your equipment's performance and prevents damage. A 350-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite's downloadable PowerAlert® software, the SMX1050SLT enables safe unattended system shutdown and file saves in case of a prolonged power failure. Adding an optional network management card permits remote management of the UPS, including reboots and activity logs

Protects Mission-Critical Equipment

• Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
• Audible alarm signals loss of utility power or overload
• 8 C13 outlets
• C14 inlet accepts user-supplied AC power cord with country-specific plug
• 350-joule surge suppression rating

Reliable Battery Backup

• Supports half load up to 20 min. and full load up to 7 min.
• Internal batteries designed for hot-swap field replacement
• Cold-start capability enables turn-on in battery mode during blackouts

Automatic Voltage Regulation (AVR)

• Maintains selectable nominal output without using battery power
• Corrects brownouts and overvoltages from 174V-266V (220V), 182V-278V (230V) or 190V-290V (240V)

EMI/RFI Line Noise Filtering

• Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance

LED Indicators

• Front-panel LEDs indicate line power, voltage regulation, load level and battery status

Optional Network Management Cards

• Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
• Optional WEBCARDLX (sold separately) with the latest version of PowerAlert Device Manager firmware (PADM20) provides enhanced remote management capabilities
• PADM20 and PowerAlert Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations

• SmartPro SMX1050SLT 1050VA Tower UPS
• SMX1050SLT UPS System
• PowerAlert Software CD-ROM
• USB and serial cabling
• 2 x IEC C13-to-C14 jumper cables
• Owner's manual with warranty information

• Set of 8-wire RJ jacks offers protection for 10baseT network connection with a clamping voltage of 7.5V on pins 1,2,3 & 6, or single line tel/DSL surge suppression starting at 260V on center pins 4 & 5
• Compatible with Tripp Lite's WatchDog Software to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipment ideal for unattended kiosk applications